HP MSR SERIES, Руководство по настройке

Страница: 279 / 889

262
Item Description
Security Level
Set the authentication and privacy mode for SNMP traps when
the security model is selected as
v3 . The available security levels
are: no authentication no privacy, authentication but no privacy,
and authentication and privacy.
If you select
v1 or v2c in the Security Model list, the security level
can only be no authentication no privacy , and cannot be
modified.
Displaying SNMP packet statistics
Select Advanced > SNMP from the navigation tree to enter the Setup tab page. On the lower part of the
page, you can view the SNMP statistics, as shown in Figure 265 .
Figure 265 SNMP Statistics page
SNMPv1/v2c configuration example
Network requirements
As shown in Figure 266 , the NMS at 1.1.1.2/24 uses SNMPv1 or SNMPv2c to manage the SNMP agent
at 1.1.1.1/24, and the agent automatically sends traps to report events to the NMS.