HP mp2200 - Digital Projector Скачать руководство пользователя страница 58

Страница: 58 / 64

Reference

Safety information

LED safety

The infrared ports located on the digital projector and remote control are classified as Class 1

LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not

considered harmful, but the following precautions are recommended:

•

If the unit requires service, contact an authorized HP service center.

•

Do not attempt to make any adjustment to the unit.

•

Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible

light and cannot be seen.

•

Do not attempt to view the infrared LED beam with any type of optical device.

Mercury safety

WARNING!

This digital projector lamp contains a small amount of mercury. If the lamp

breaks, adequately ventilate the area where the breakage occurred, discard any nearby food

and drink, and thoroughly clean the table surface around the projector. Wash your hands after

cleaning the area or handling a broken lamp. Disposal of this lamp may be regulated due to

environmental considerations. For disposal or recycling information, please contact your local

authorities or the Electronic Industries Alliance (www.eiae.org). You can find safety information

about the lamp at www.hp.com/hpinfo/globalcitizenship/environment/productdata.

Содержание mp2200 - Digital Projector

































































Результаты поиска

Содержание mp2200 - Digital Projector

Отзывы:

Похожие инструкции для mp2200 - Digital Projector

Бренды по названию

Популярные бренды

HP mp2200 - Digital Projector, Руководство пользователя

Результаты поиска

Содержание mp2200 - Digital Projector

Отзывы:

Похожие инструкции для mp2200 - Digital Projector

Бренды по названию

Популярные бренды