HP Model 744 - VME Workstation, Инструкция по установке и обслуживанию

Страница: 21 / 32

Installing the FWD SCSI Adapter
2–5
3. For Model 743 only, install new Boot ROM if required.
If after reading the prerequisites for firmware in Chapter 1 you must replace the Boot
ROM, use the following procedure.
a.
Remove the Boot ROM from its socket on the Model 743, at location U54, using the
IC removal tool as shown in Figure 2–3.
b.
Align the new Boot ROM in its socket, at location U54, with the keyed corner
matching the sockets keyed corner. Carefully press the new Boot ROM into its
socket. See Figure 2–3.
Keyed Corner
U54
Figure 2–3. Removing and Replacing the Boot ROM