Installing the Rack Server
5-14
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: f-ch5 Installing the Rack Server.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:17 PM
Attaching the Cable Management Arm Bracket
The cable management arm bracket fastens to the top-left-rear of the rack server
chassis as you look at the rear of the server. The bracket provides an attachment point
for the cable management arm from the server to the rear frame of the rack.
To attach the cable management arm bracket:
1.
Align the two keyholes on the cable management arm bracket over the posts on
the rear panel of the chassis.
2.
Slide the arm down to secure the keyholes onto the posts (1).
3.
Tighten the thumbscrew to secure the cable management arm to the server (2).
Figure 5-9: Attaching a cable management arm bracket
to the server
