Disposing of a used battery
WARNING!
To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short
external contacts; do not dispose of in fire or water.
Refer to the
Regulatory, Safety and Environmental Notices
for battery disposal information.
Shutting down the computer
CAUTION:
Unsaved information is lost when the computer is shut down.
The Shut Down command closes all open programs, including the operating system, and then turns off
the display and computer.
Shut down the computer under any of the following conditions:
●
When you need to replace the battery or access components inside the computer
●
When you are connecting an external hardware device that does not connect to a USB port
●
When the computer is unused and disconnected from external power for an extended period
To shut down the computer, follow these steps:
NOTE:
If the computer is in Standby or in Hibernation, you must first exit Standby or Hibernation before
shutdown is possible.
1.
Save your work and close all open programs.
2.
Select
Start
>
Turn Off Computer
>
Turn Off
.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
●
Press
ctrl+alt+delete
. Then, select
Shut Down
>
Turn Off
.
●
Slide and hold the power switch for at least 5 seconds.
●
Disconnect the computer from external power and remove the battery.
Shutting down the computer
25
Содержание Mini 210-1008TU
Страница 1: ...Mini User Guide ...
Страница 4: ...iv Safety warning notice ...
Страница 50: ...Volume can also be adjusted within some programs 42 Chapter 5 Multimedia ...
Страница 94: ......