HP LT3200 Скачать руководство пользователя страница 48

Страница: 48 / 102

HP High-Definition LCD TV Service Manual

This section includes information about disassembling the LCD TV for service.

Equipment and Tools Needed for Removal and Replacement

Tools

•

#1 and #2 magnetic Philips screwdriver with 6-inch shaft, no greater than 3/8-inch in diameter

•

3/16-inch hex driver

•

5/8-inch hex driver

•

ESD protect gloves

•

ESD protect wristband

Note

: An HDMI to DVI converter is for use on notebook computers with DVI connectors.

After Service Checklist

Make sure all the mechanical parts such as screws are replaced properly.

Verify that the peripherals of the serviced points have not undergone any deterioration during servicing.

Verify that the screws, parts, and cables that are removed for servicing have all been returned to their proper locations per the
original setup.

Check the software version.

Check whether or not the TV works properly from each source.

Basic Adjustment Settings

No extra adjustments settings are needed.

Removal and Replacement

Содержание LT3200







































































































Результаты поиска

Содержание LT3200

Отзывы:

Бренды по названию

Популярные бренды

HP LT3200, Руководство по обслуживанию

Результаты поиска

Содержание LT3200

Отзывы:

Бренды по названию

Популярные бренды