background image

1

Product Features

L2445m Model

The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The monitor
features include:

60.96 cm (24-inch) diagonal viewable area display with 1920 x 1200 resolution, plus full-screen
support for lower resolutions; includes custom scaling for maximum image size while preserving
original aspect ratio

Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side

Tilt capability

Removable base for flexible monitor panel mounting solutions

Video signal input to support VGA analog with VGA signal cable provided

Video signal input to support DVI digital

Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar

Plug and play capability if supported by the system

Privacy filter slots to insert filters (purchased separately) to block side screen viewing

Security slot provision on rear of monitor for optional cable lock

Internal speakers

Audio input signal with audio cable provided

On-Screen Display (OSD) adjustments in several languages for easy setup and screen
optimization

Software and documentation CD that includes software, monitor drivers, and product
documentation

Energy saver feature to meet requirements for reduced power consumption

Energy Star qualified

ENWW

L2445m Model

1

Содержание L2445m








































Отзывы: