
HP L1510 15” LCD Monitor
Setting Up Your Monitor
6
English
English
Connecting the Cables
This monitor is equipped with an auto-sensing power supply for
voltage ranges 100 ~ 240V AC, 50 ~ 60 Hz. Only use with the supplied
adapter.
1
Make sure the system power is turned off.
2
Plug the signal cable into the signal connector at the rear of the
PC.
3
Plug the adapter output cable into the jack at the rear of the
monitor and the power cord to the adapter.
4
Plug the video cable into the video connector at the rear of the
monitor.
Secure the cable by tightening the thumb screws on the video
connector.
5
Connect the audio cables to the connectors according to the
following color definitions:
Red + Green end
➔
PC
Red + Blue end
➔
rear of LCD monitor
6
Connect the power cord to the power source.
7
Turn on the computer and the monitor.
power cord
video cable
adapter output
power source
audio connectors
video connector