HP KZM-6120, Руководство пользователя

Страница: 45 / 46

BIOS Setup
3 - 17
EPP Mode Select
If your select EPP or ECP+EPP in Parallel Port Mode, this feature allows
you to select the EPP type version.
The options are: EPP1.9, EPP1.7 (Default).
ECP Mode Use DMA
If your select ECP or ECP+EPP in Parallel Port Mode, this feature allows
you to select Direct Memory Access (DMA) channel.
The options are: 3 (Default), 1.
Supervisor/User Password
To enable the Supervisor/User passwords, select the item from the Standard
CMOS Setup. You will be prompted to create your own password. Type your
password up to eight characters and press Enter. You will be asked to confirm
the password. Type the password again and press Enter. To disable password,
press Enter twice when you are prompted to enter a password. A message
appears, confirming the password is disabled.
Under the BIOS Feature Setup, if Setup is selected under the Security Option
field and the Supervisor/User Password is enabled, you will be prompted
password every time you try to enter the CMOS Setup Utility. If System is
selected and the Supervisor/User Password is enabled, you will be requested
to enter the Password every time when you reboot the system or enter the
CMOS Setup utility.
IDE HDD Auto Detection
The IDE Hard Disk Drive Auto Detection feature automatically configures
your new hard disk. Use it for a quick configuration of new hard drives. This
feature allows you to set the parameters of up to four IDE HDDs. The option
with (Y) are recommended by the system BIOS. You may also keys in your own
parameters instead of setting by the system BIOS. After all settings, press Esc
key to return the main menu. For confirmation, enter the Standard CMOS
Setup feature.
Parallel Port Mode
Allows you to connect with an advanced printer.
The options are: SPP (Default), EPP, ECP, ECP+EPP.