HP Kayak XW A2-U2-W2, Руководство пользователя

Страница: 65 / 154

English 51
2 How to Install Accessories Inside Your PC Workstation
Installing a Processor
Completing the
Installation of a
Processor
1 Verify that the system board bus speed switches are correctly
configured for the processor.
NOTE If two processors are installed, both must operate at the same bus speed
and processor speed. Refer to the manual supplied with the processor
to verify which bus and processor speeds are supported.
2 Install any other accessories before completing the installation of the
processor.
3 Replace the cover (see page 23).
4 Turn on the computer and check that the new processor is
recognized by the power-on system-test.
NOTE To fully benefit from dual processing, you will need to re-install
Windows NT 4.0 on your PC Workstation.
1. UP=OFF, DOWN=ON.
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Bus
Speed Processor
Speed
UP
1
DOWN DOWN UP UP 66 MHz 233 MHz
UP DOWN UP DOWN DOWN 66 MHz 266 MHz
UP DOWN UP DOWN UP 66 MHz 300 MHz
UP DOWN UP UP DOWN 66 MHz 333 MHz
rio.bk : rio-ug2.fb4 Page 51 Tuesday, August 19, 1997 4:40 PM