manualshive.com logo in svg

HP Kayak XA-s Series 02, Руководство пользователя

Поделиться
Скачать
HP Kayak XA-s Series 02 Скачать руководство пользователя страница 27

English

15

3   Basic System Test

Test Result: PASSED

Test Result: 

PASSED

If the basic system test is successful, a screen similar to the following 
will appear: 

The following action is recommended:

•

If you are running the Hardware Diagnostics for verification 
purposes only, there is no need to continue with the Advanced Tests 
or to create a support ticket. Press 

to exit DiagTools.

•

If you are investigating a known hardware problem, press 

to 

create a Support Ticket. Although no failure was detected, the 
Support Ticket will be effective for communicating the test results 
and PC configuration to your local or HP-dedicated support agent. 
(To learn more about the Support Ticket, refer to chapter 5.)

Intermediate and experienced users should proceed to the 
Advanced System Tests, since the error was not traced using the 
basic system test. 

Содержание Kayak XA-s Series 02





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды