HP J4861A, Руководство по установке и началу работы

Страница: 18 / 94

Introducing the HP ProCurve Series 4100gl Switches
Switch Features
In
trodu
cing
th
e HP ProCurve
Series 41
00gl Switches
Switch Features
The features of the Series 4100gl Switches include:
■
4 or 8 slots for installing any of the available Switch gl Modules.
Supported Modules:
As of this printing, the supported gl modules
includes:
• 24-port 10/100-TX gl Module (J4862A)
• 6-port 100/1000-T gl Module (J4863A)
• 3-port Gigabit Transceiver gl Module (J4864A) -- into which you can
install any of five different transceiver types including Gigabit-SX,
Gigabit-LX, 100/1000Base-T, Gigabit Stacking, and 100Base-FX
• 6-port mini-GBIC gl Module (J4893A) -- into which you can install the
supported mini-GBICs, the HP Gigabit-SX LC mini-GBIC (J4858A) and
the HP Gigabit-LX LC mini-GBIC (J4859A)
• 20-port Gig-T gl module with 2 mini-GBIC Gig ports (J4908A)
The Switch 4108gl Bundle has one Gigabit Transceiver gl Module and three
10/100-TX gl Modules preinstalled, and the Switch 4148gl has two 10/100-
TX gl Modules preinstalled.
■
the modules can be installed in any order and in any combination and can
be “hot swapped”.
■
the supported HP ProCurve transceivers can be hot swapped into the
Gigabit Transceiver gl Module.
■
the supported mini-GBICs can be hot swapped into the mini-GBIC gl
Module.
■
high performance -- 36.6 Gbps switching fabric.
■
plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational.
■
automatic learning of the network addresses in the switch’s 8000-address
forwarding table, with configurable address aging value.
■
full-duplex operation available on all ports.
Switch Features continued on the next page.
1-10