HP J3138A, Руководство по установке

Страница: 23 / 104

2-7
Installing the HP AdvanceStack Internet Router
Preparing to Connect to a Network
In
st
all
a
ti
on
Console Port Connections
The router includes an EIA/TIA-232 asynchronous serial console port (RJ-45).
Depending on the cable and the adapter used, this port will appear as a DTE
or DCE device at the end of the cable. Your router comes with cables and
adapters to connect a console terminal (an ASCII terminal or PC running
terminal emulation software) to the console port. To connect an ASCII
terminal to the console port, use the RJ-45 roll-over cable with the female
RJ-45-to-DB25 adapter (labeled Terminal). To connect a PC running terminal
emulation software to the console port, use the RJ-45 roll-over cable with the
female RJ-45-to-DB-9 adapter (labeled Terminal). The default parameters for
the console port are 9600 baud, 8 data bits, no parity, and 2 stop bits. The
console port does not support hardware flow control. For detailed informa-
tion about installing a console terminal, see the section “Connecting the
Console Terminal and Modem” later in this chapter. See appendix A “Cable
Specifications” for cable and port pinouts.
Auxiliary Port Connections
The router includes an EIA/TIA-232 asynchronous serial auxiliary port (RJ-45)
that supports flow control. Depending on the cable and the adapter used, this
port will appear as a DTE or DCE device at the end of the cable. Your router
includes a cable and an adapter to connect a modem to the auxiliary port. To
connect a modem to the auxiliary port, use the RJ-45 roll-over cable with the
male RJ-45-to-DB-25 adapter (labeled Modem). For detailed information about
connecting devices to the auxiliary port, see the section “Connecting the
Console Terminal and Modem” later in this chapter. See appendix A “Cable
Specifications” for cable and port pinouts.