HP invent mp31300W Скачать руководство пользователя страница 65

Страница: 65 / 84

User’s Guide

Fixing Problems

Sound problems

If no sound is coming out of the projector:

❏

Be sure you have an audio cable securely connected between the
projector and the input device.

❏

Be sure that the mute and volume settings are correct on the input
device, such as a computer, DVD player, or camcorder.

❏

Open the on-screen menu and select

Audio.

Check the following

settings:

◆

Mute is turned off.

◆

Volume is correct.

Interruption problems

If the lamp indicator or temperature indicator turns on or blinks:

❏

If the lamp indicator turns on, the lamp has failed. Install a new
lamp.

❏

If the lamp indicator blinks, the lamp is not able to light. Wait for
the projector to cool, then try starting it again. If the indicator
blinks again, install a new lamp.

❏

If the temperature indicator turns on or blinks, the projector is too
hot. See the following problem.

If the projector suddenly shuts down and the temperature light turns on:

❏

If the temperature light is blinking, the fan is not working. Allow
the projector to cool for several minutes.

❏

If the temperature light is steady, the projector has overheated.
Allow it to cool for several minutes.

❏

If airflow is obstructed, remove the obstruction.

❏

If possible, remove any sources of excess heat in the room.

❏

If the condition occurs after restarting the projector, contact HP
to have the projector serviced or repaired.

Содержание invent mp31300W





















































































Результаты поиска

Содержание invent mp31300W

Отзывы:

Похожие инструкции для invent mp31300W

Бренды по названию

Популярные бренды

HP invent mp31300W, Руководство пользователя

Результаты поиска

Содержание invent mp31300W

Отзывы:

Похожие инструкции для invent mp31300W

Бренды по названию

Популярные бренды