Attaching the Leveling Feet and Leveling the Cabinet
After positioning the cabinet in its final location, to attach and adjust the leveling feet, follow these
steps:
1.
Remove the leveling feet from their packages.
2.
Attach the leveling feet to the cabinet using four T-25 screws.
Figure 20 Attaching the Leveling Feet
3.
Screw down each leveling foot clockwise until it is in firm contact with the floor. Adjust each
foot until the cabinet is level.
Installing the Front Door Bezels and the Front and Rear Blower Bezels
Each cabinet has two doors, one at the front and one at the back. The back door is shipped on
the chassis and requires no assembly. The front door, which is also shipped on the chassis, requires
the assembly of two plastic bezels to its front surface and a cable from the door to the upper front
bezel. In addition, you must install bezels that fit over the blowers at the front and back of the
cabinet.
Installing the Front Door Bezels
The front door assembly includes two cosmetic covers, a control panel, and a key lock. To install
the front door, you must connect the control panel ribbon cable from the chassis to the control
panel and mount the two plastic bezels onto the metal chassis door.
IMPORTANT:
The procedure in this section requires two people and must be performed with the
front metal chassis door open.
To install the front door assembly, follow these steps:
1.
Open the front door, unsnap the screen, and remove all the filters held in place with Velcro.
2.
Remove the cabinet keys that are taped inside the top front door bezel.
3.
Insert the shoulder studs on the lower door bezel into the holes on the front door metal chassis
(
Figure 21
).
26
Installing the System