2.
Log in using the default the iLO 2 MP user name and password (Admin/Admin).
TIP:
For security reasons, HP strongly recommends you modify the default settings during
the initial login session. See
“Modifying User Accounts and Default Password” (page 50)
The following items are available from the MP Main Menu:
iLO MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
SMCLP: Server Management Command Line Protocol
HE: Main Menu Help
X: Exit Connection
See the HP Integrity iLO 2 Operations Guide for information on the iLO 2 MP menus and commands.
When logging in using the local or remote RS-232 serial ports, the login prompt may not display
if another user is logged in through these ports. To access the MP Main Menu and the iLO 2 MP
prompt (
MP>
), press
Ctrl-B
.
Additional Setup
This section provides additional information to setup the iLO 2 MP.
Modifying User Accounts and Default Password
The iLO 2 MP comes preconfigured with default factory settings, including a default user account
and password. The two default user accounts on initial login are:
•
All Rights (Administrator) level user:
login =
Admin
password =
Admin
•
Console Rights (Operator) level user:
login =
Oper
password =
Oper
IMPORTANT:
Login and password are case sensitive.
TIP:
For security reasons, HP strongly recommends you modify the default settings during the
initial login session.
Make the following changes using any of the iLO 2 MP user interfaces.
To modify default account configuration settings, follow these steps:
1.
Log in as the administrator. You must log in as the administrator in order to modify default
user configuration settings
2.
To modify default passwords:
a.
Access the MP Main Menu.
b.
Enter
CM
at the
MP>
prompt.
c.
Enter
UC
at the
MP:CM>
prompt and follow the prompts to modify default passwords.
50
Installing the System
