HP Integrity NonStop i NS2300 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 81

background image

Technical Document for NS2300 Systems

Each new NS2300 includes a detailed Technical Document that serves as the connection map
for the system and which describes:

•

Rack included with the system and each enclosure installed in the rack

•

Rack U location at the bottom edge of each enclosure

•

Each cable with source, destination, connector type, cable part number, and connection
labels

TIP:

It is important to retain all NS2300 system records in an Installation Document Packet,

including the Technical Document for your system and any configurations forms. To add CLIM
configuration forms to your Installation Document Packet, have your service provider copy the
forms from the

CLuster I/O Module (CLIM) Installation and Configuration Manual

and the

Versatile

I/O Manual

(for IP or Telco CLIM-related configurations).

NS2300 Standard and Optional Hardware

•

“Blade Element (rx2800 i4) ” (page 10)

•

“Versatile I/O (VIO) Enclosure ” (page 10)

•

“CLuster I/O Modules (CLIMs) ” (page 11)

•

“SAS Disk Enclosure” (page 16)

•

“Maintenance Switch” (page 18)

•

“System Console ” (page 18)

•

“UPS and ERM (Optional)” (page 18)

•

“Enterprise Storage System — ESS (Optional)” (page 19)

Blade Element (rx2800 i4)

The rx2800 i4 server is adapted for use as an AC-powered blade element in the NS2300 system.
Each blade element contains an Intel® Itanium® processor with one core enabled and a ServerNet
PCI adapter card to provide connectivity to the ServerNet fabrics.

NOTE:

NS2300 blade elements cannot be mixed with NS2400 blade elements in the same

system.

For details about the rx2800 i4 server, see the

HPE Integrity rx2800 i4 Server User Service Guide

at:

http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/manualsResults/?
sp4ts.oid=5330448

Versatile I/O (VIO) Enclosure

Two VIO enclosures, one required for each ServerNet fabric, provide Gigabit Ethernet networking
and I/O connectivity as shown in

Figure 2 (page 25)

For more information on VIO enclosure connections, have your service provider refer to the

Technical Document

, the

Versatile I/O Manual, and the NonStop Hardware NS2100 and NS2300

Hardware Installation Manual

.

10

NS2300 System Overview

«
...
8
9
10
11
12
...
»

Содержание Integrity NonStop i NS2300


















































































Отзывы:

Нет отзывов

Похожие инструкции для Integrity NonStop i NS2300

eServer BladeCenter JS20 Type 8842

Бренд: IBM Страницы: 150

x3655 - System - 7985

Бренд: IBM Страницы: 118

Бренд: ExtraHop Страницы: 5

eServer 130 xSeries

Бренд: IBM Страницы: 156

Бренд: Kontron Страницы: 110

Bull Escala E5-700

Бренд: IBM Страницы: 116

Бренд: Sollae Systems Страницы: 45

DocuColor 45087638

Бренд: Xerox Страницы: 28

419452u - Servers System X3250 M2 Xeon...

Бренд: IBM Страницы: 84

Бренд: Crestron Страницы: 2

S7000FC4UR - Server System - 0 MB RAM

Бренд: Intel Страницы: 13

Бренд: SEH Страницы: 32

Бренд: Planet Страницы: 72

NETWORK SATELLITE 5.3.0 - CHANNEL MANAGEMENT

Бренд: Red Hat Страницы: 318

Бренд: pachanko Страницы: 56

VANTAGE RADIUS 50

Бренд: ZyXEL Communications Страницы: 1

Бренд: ZyXEL Communications Страницы: 4

Бренд: Supermicro Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды