manualshive.com logo in svg

HP Integrity MC990 X, Руководство пользователя

Поделиться
Скачать
HP Integrity MC990 X Скачать руководство пользователя страница 50

Integrity MC990 X system Troubleshooting

This chapter provides the following sections to help you troubleshoot your system:

•

Troubleshooting chart

 on page 50

•

LED status indicators

 on page 50

Troubleshooting chart

Cause

Table 1: Problems and recommended actions

Problem Description

Recommended Action

The system will not power on.

Ensure that the power cords of the MC990 X server
chassis are seated properly in all power receptacles.

Ensure that the PDU circuit breakers are on and properly
connected to the wall source.

If the power cords are plugged in and the circuit breaker
is on, contact your support provider.

An individual chassis will not power on.

Ensure all the power cables of the chassis are plugged
in.

Confirm the PDU(s) supporting the chassis are on.

The system will not boot the operating
system.

Contact your authorized support organization.

An amber LED illuminates on a
motherboard.

See 

MC990 X server chassis power supply LED

states

 for a description of the status message.

The amber (yellow) status LED of a power
supply is lit or the LED is not lit at all. See 

MC990 X server chassis power supply
LED states

.

Ensure the power cable to the supply is firmly connected
at both ends and that the PDU is turned to on. Check and
confirm the supply is fully plugged into it’s slot. If the
green LED does not light, contact your support engineer.

The PWR LED of a populated PCIe slot is
not illuminated.

Reseat the PCIe card.

The Fault LED of a populated PCIe slot is
illuminated (on).

Reseat the card. If the fault LED remains on, replace the
card.

The amber or red LED of a disk drive is on.

Replace the disk drive.

LED status indicators

There are a number of LEDs on the MC990 X server chassis that can help you detect, identify and
potentially correct functional interruptions in the system. The following subsections describe these LEDs
and ways to use them to understand potential problem areas.

50

 Integrity MC990 X system Troubleshooting

Содержание Integrity MC990 X








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды