2 Million Imp - Preventive Maintenance Guide - HP Indigo press 5000
CA294-00570
rev 01
page 3 of 18
Monthly maintenance
Date:
Time
spent:
HP Indigo press 5000 S/N:
Service person:
Customer name:
Country/State:
Required parts
Complete CE kit. See page 12.
General inspection
Check for external dirt, leakage and signs of improper
maintenance. Initiate a service call if there is a
leakage problem.
Verify that daily and weekly operator routines have
been performed correctly. See the latest User Guide.
Verify that all lubrication points have been oiled and
greased properly. See the latest User Guide.
Inform your regional manager if the press is not
properly maintained.
Config save
Perform Config save to update the customer diskette.
Ink unit
Calibrate the density sensors.
Calibrate the ink conductivity sensors.
Calibrate the ink flow rate.
ITM Drum
Clean ITM slip ring (the bias contacts path) using IPA.
Clean the ITM thermostat slip ring.
Verify the temperature sensor reading, and calibrate,
if required.
Make sure that the surface facing the IR sensor is
clean.
Inspect and thoroughly clean the ITM hood wire mesh
filter on the rear wall using IPA soaked cloth.
Caution:
Shut down the press before removing the
mesh.
