HP Image Library, Руководство администратора

Страница: 34 / 66

2 Local Automatic Installation
Installing Components Without the User Interface
34
Installing Components Without the User Interface
You can install individual drivers or software utilities from the Image
Library CD-ROM. To do this, locate the desired component for your
operating system, then run the
Setup.exe
file.
For more information about the directory structure of the CD-ROM,
refer to page 14.
Troubleshooting
•
If you encountered any problems installing a component, you can try
to install it manually using the installation files that were copied to
the target PC’s hard disk in the
\Masters
directory.
•
If you encountered any problems installing the LAN driver, you must
first remove the driver before trying to install it again. For example,
to do this in Windows NT 4.0, click
Start Settings Control
Panel
, double-click
Network
, click the
Adapters
tab, select the
driver and click
Remove
.
Log File
Troubleshooting
Information
After each component installation, the Image Library verifies that the
component installed correctly. These results are written in the log file
(
ImageLibrary.log
, located in the hard drive’s root directory).
In fact, the log file contains a complete trace of the installation process.
Therefore you should consult the log file for valuable troubleshooting
information.