HP HPE XP P9500 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 608

HP HPE XP P9500 Скачать руководство пользователя страница 2

© Copyright 2007, 2011 Hewlett-Packard Development Company, L.P.

Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial

Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under

vendor's standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Acknowledgments

Microsoft, Windows, and Windows XP are U.S. registered trademarks of Microsoft Corporation.

Hitachi and Universal Replicator are registered trademarks of Hitachi, Ltd.

ShadowImage and TrueCopy are registered trademarks of Hitachi, Ltd. and Hitachi Data Systems Corporation.

Export Requirements

You may not export or re-export this document or any copy or adaptation in violation of export laws or regulations.

Without limiting the foregoing, this document may not be exported, re-exported, transferred or downloaded to or within (or to a national resident

of) countries under U.S. economic embargo, including Cuba, Iran, North Korea, Sudan, and Syria. This list is subject to change.

This document may not be exported, re-exported, transferred, or downloaded to persons or entities listed on the U.S. Department of Commerce

Denied Persons List, Entity List of proliferation concern or on any U.S. Treasury Department Designated Nationals exclusion list, or to parties directly

or indirectly involved in the development or production of nuclear, chemical, biological weapons, or in missile technology programs as specified

in the U.S. Export Administration Regulations (15 CFR 744).

Revision History

Description

Date

Edition

This document revision applies to Business Continuity Manager version 5.1 and higher.

September 2007

First

This document revision applies to Business Continuity Manager version 5.5 and higher.

January 2008

Second

This document revision applies to Business Continuity Manager version 6.00 and higher.

June 2008

Third

This document revision applies to Business Continuity Manager version 6.10 and higher.

December 2008

Fourth

This document revision applies to Business Continuity Manager version 6.20 and higher.

June 2009

Fifth

This document revision applies to Business Continuity Manager version 6.30 and higher.

December 2009

Sixth

This document revision applies to Business Continuity Manager version 6.40 and higher.

June 2010

Seventh

This document revision applies to Business Continuity Manager version 6.50 and higher.

October 2010

Eighth

This document revision applies to Business Continuity Manager version 6.50 and higher.

November 2010

Ninth

This document revision applies to Business Continuity Manager version 6.60 and higher.

May 2011

Tenth

This document revision applies to Business Continuity Manager version 6.60 and higher.

October 2011

Eleventh

«
1
2
3
4
...
»

Содержание HPE XP P9500

































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов