HP HPE VAN SDN Controller 2.7, Руководство администратора, Страница: 34 / 231

Description Screen component
The most common states are
active
,
staged
and
disabled
. State
The name and version number of SDN applications purchase from the Hewlett
Packard Enterprise SDN App Store. AppStore Purchased
Applications
Launches the Hewlett Packard Enterprise SDN App Store website. Launch AppStore
Obtaining applications from the Hewlett Packard Enterprise SDN App Store
From the App Store, you can purchase and download applications for your controller.
In the case of a web proxy, you need a proxy configuration to connect to the App Store portal.
To set the proxy, in the
/etc/init/sdnc.conf
file, replace
c1
,
c2
,
c3
, and
team
with the
controller IP addresses and the team IP address (when applicable):
env JAVA_OPTS="-Xms512m -Xmx4096m -XX:MaxPermSize=512m -Dhttps.proxyHost= my-web-proxy
-Dhttps.proxyPort= my-web-proxy-port -Dhttp.nonProxyHosts=127.0.0.1|localhost| c1 | c2 | c3 | team "
Command Example
env JAVA_OPTS="-Xms512m -Xmx4096m -XX:MaxPermSize=512m -Dhttps.proxyHost=web-proxy.test.com -Dhttps.proxyPort=8088
-Dhttp.nonProxyHosts=127.0.0.1|localhost|11.152.121.172|11.152.126.13|11.152.127.5|11.152.123.6"
You must update the
/etc/init/sdnc.conf
file on each controller and then restart the
controllers for these changes to take effect.
If you are downloading a signed application from the App Store, the JAR signing requires a
trusted certificate in the
sdnjar_trust.jks
file even if the certificate is trusted in the JAVA
cacerts
keystore. For details, see “Adding certificates to the jar-signing truststore ” (page 121)
Adding or upgrading an application
Any application in the proper format can be added to the controller (see “About the application
manager” (page 32) ).
To use curl commands and the REST APIs to complete this task, see “curl commands” (page 170) .
After you complete this procedure:
•
The application is started and in an active state.
•
If the controller is in a controller team, the controller propagates the application to all the
controllers in the team automatically.
Use this procedure to install either a new application or a new version of an existing application
on the controller using the UI.
1. Do one of the following:
•
To install a new application, click New .
•
To upgrade to a new version of an existing application, select the application from the
Name list and click Upgrade .
2. Click Browse to navigate to the location of the application zip file and select the file.
3. Click Upload to upload the file.
Wait for Completed to appear. For example:
34 Using the SDN controller UI