manualshive.com logo in svg

HP HPE ProLiant DL180 Gen10, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP HPE ProLiant DL180 Gen10 Скачать руководство пользователя страница 101

• Erase Utility

• Deployment Settings

IMPORTANT:

• Although your server is pre-loaded with firmware and drivers, you should update the firmware

upon initial setup to ensure you have the latest versions. Also, downloading and updating the
latest version of Intelligent Provisioning ensures the latest supported features are available.

• For ProLiant servers, firmware is updated using the Intelligent Provisioning Firmware Update

utility.

• Do not update firmware if the version you are currently running is required for compatibility.

NOTE: 

Intelligent Provisioning does not function within multihomed configurations. A multihomed host is

one that is connected to two or more networks or has two or more IP addresses.

Intelligent Provisioning provides installation help for the following operating systems:

• Microsoft Windows Server

• Red Hat Enterprise Linux

• SUSE Linux Enterprise Server

• VMware ESXi/vSphere Custom Image

Not all versions of an OS are supported. For information about specific versions of a supported operating
system, see the OS Support Matrix on the Hewlett Packard Enterprise website (

http://www.hpe.com/

info/ossupport

).

HPE Insight Remote Support

Hewlett Packard Enterprise strongly recommends that you register your device for remote support to
enable enhanced delivery of your Hewlett Packard Enterprise warranty, HPE support services, or Hewlett
Packard Enterprise contractual support agreement. Insight Remote Support supplements your monitoring
continuously to ensure maximum system availability by providing intelligent event diagnosis, and
automatic, secure submission of hardware event notifications to Hewlett Packard Enterprise, which will
initiate a fast and accurate resolution, based on your product’s service level. Notifications can be sent to
your authorized Hewlett Packard Enterprise Channel Partner for onsite service, if configured and
available in your country.

For more information, see 

Insight Remote Support and Insight Online Setup Guide for ProLiant Servers

and BladeSystem c-Class Enclosures

 on the 

Hewlett Packard Enterprise website

. Insight Remote

Support is available as part of Hewlett Packard Enterprise Warranty, HPE support services, or Hewlett
Packard Enterprise contractual support agreement.

USB support

Hewlett Packard Enterprise Gen10 servers support all USB operating speeds depending on the device
that is connected to the server.

External USB functionality

Hewlett Packard Enterprise provides external USB support to enable local connection of USB devices for
server administration, configuration, and diagnostic procedures.

Diagnostic tools

101

Содержание HPE ProLiant DL180 Gen10






























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды