HP HP DL360 G7 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 87

HP HP DL360 G7 Скачать руководство пользователя страница 51

Removal and replacement procedures 51

7.

Install the heatsink.

8.

Install the air baffle ("

" on page

9.

If removed, install the BBWC battery pack or the FBWC capacitor pack ("

BBWC battery pack or

FBWC capacitor pack

" on page

10.

Install the access panel ("

" on page

11.

Slide the server into the rack.

12.

Power up the server.

System battery

If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.

WARNING:

The computer contains an internal lithium manganese dioxide, a vanadium

pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:

•

Do not attempt to recharge the battery.

•

Do not expose the battery to temperatures higher than 60°C (140°F).

•

Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

•

Replace only with the spare designated for this product.

To remove the component:

1.

Power down the server (on page

2.

Extend or remove the server from the rack ("

Extend the server from the rack

" on page

the server from the rack

" on page

3.

Remove the access panel ("

" on page

4.

If installed, remove the BBWC battery pack or the FBWC capacitor pack ("

BBWC battery pack or

FBWC capacitor pack

" on page

5.

Remove the air baffle ("

" on page

6.

Locate the battery on the system board ("

System board components

" on page

«
...
49
50
51
52
53
...
»

Содержание HP DL360 G7
























































































Отзывы:

Нет отзывов