No.
Task
Reference
Avaya recommendation
6
Remove the cabinet doors,
if necessary.
7
Determine and plan the
vertical spacing of the
servers in the frame.
Note that air flows into the
front of the server and out
the air vents located on the
top surface of the server
chassis. A 1U spacing is
sufficient.
8
Attach the rails to the rack.
The rails included with the
server will accommodate
most square-hole racks. If
these rails do not fit the
rack, the customer must
provide rails or a shelf for
rack installation. Also, the
rails included with the server
might not
work with round-
hole racks, in which case
the customer can obtain
rails and/or a shelf from any
distributor, for example
http://
www.racksolutions.com/.
The customer-provided rails
and rack must be on site
prior to the first day of
installation.
Note:
The customer is
responsible for any
rack screws.
9
Attach the server to the
rack.
UG:
Installing the server into
the rack
10
(Optional) Install the cable
management arm.
11
Connect to the network.
12
Connect the power cord(s).
SP:
Connecting the power
cord to the power supply
UG:
Powering up and
configuring the server
13
Power up the server.
UG:
Powering up and
configuring the server
Installing the server in the rack
January 2012
Installing the HP DL360 G7 Server
11
Comments on this document? [email protected]
