HP HP 830 Series, Руководство по настройке, Страница: 424 / 530

412
Item Description
Username Format
Select the format of usernames to be sent to the RADIUS server.
Typically, a username is in the format of
userid @ isp-name , of which isp-name
is used by the device to determine the ISP domain for the user. If a RADIUS
server (such as old RADIUS servers) does not accept a username that
contains an ISP domain name, you can configure the device to remove the
domain name of a username before sending it to the RADIUS server. Options
include:
•
With domain name —Configure the device to include the domain name in
a username.
•
Without domain name —Configure the device to remove any domain
name of a username.
Unit of Data Flows
Specify the unit for data flows sent to the RADIUS server:
•
Byte.
•
Kilo-byte.
•
Mega-byte.
•
Giga-byte.
Unit of Packets
Specify the unit for data packets sent to the RADIUS server:
•
One-packet.
•
Kilo-packet.
•
Mega-packet.
•
Giga-packet.
Security Policy Server Specify the IP address of the security policy server.
RADIUS configuration example
Network requirements
As shown in Figure 423 , configure the switch to use the RADIUS server for user authentication and
accounting (record the online duration of the Telnet user).
• Configure RADIUS servers on IMC to use the default authentication and accounting ports.
Configure an account for the Telnet user.
•
Set the shared keys to abc for authentication and accounting exchanges between the switch and the
RADIUS server.
• Configure the switch to remove domain names from the usernames sent to the RADIUS server.
Figure 423 Network diagram
Configuration prerequisites
•
Enable the Telnet server function and configure the switch to implement AAA for Telnet users.
(Details not shown.)
• Assign IP addresses to the interfaces. (Details not shown.)