manualshive.com logo in svg

HP HP 242 G2, Руководство по техническому обслуживанию и ремонту, Страница: 72 / 125

Поделиться
Скачать
HP HP 242 G2 Скачать руководство пользователя страница 72

Power connector cable

Description

Spare part number

Power connector cable

732625-001

Before removing the power connector cable, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 33

) and then remove the following components:

a.

Hard drive (see 

Hard drive on page 34

)

b.

WLAN module (see 

WLAN module on page 37

)

c.

Solid-state drive (see 

mSATA drive on page 39

)

d.

Memory module service cover (see 

Memory module on page 40

)

e.

Optical drive (see 

Optical drive on page 42

)

f.

Keyboard (see 

Keyboard on page 46

)

g.

Top cover (see 

Top cover on page 49

)

h.

Fan (see 

Fan on page 56

)

i.

System board (see 

System board on page 59

)

Remove the power connector cable:

1.

Turn the system board upside down, with the front toward you.

2.

Disconnect the power cable from the system board.

62

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание HP 242 G2






























































































































Отзывы:

Нет отзывов