manualshive.com logo in svg

HP HP 242 G2, Руководство по техническому обслуживанию и ремонту, Страница: 49 / 125

Поделиться
Скачать
HP HP 242 G2 Скачать руководство пользователя страница 49

mSATA drive

Description

Spare part number

32-GB mSATA drive

728857-001

Before removing the mSATA drive, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 33

).

5.

Remove the hard drive service cover (see 

Hard drive on page 34

).

Remove the mSATA drive:

1.

Remove the Phillips PM2.0×2.0 screw 

(1)

 that secures the mSATA drive to the system board. (The

mSATA drive tilts up.)

2.

Remove the mSATA drive 

(2)

 by pulling the module away from the slot at an angle.

Reverse this procedure to install the mSATA drive.

Component replacement procedures

39

Содержание HP 242 G2






























































































































Отзывы:

Нет отзывов