HP hn200w, Руководство пользователя

Страница: 54 / 94

wireless gateway
54
❑
Host Name: Allows you to create a name for the Gateway, required by some
Internet Service Providers (ISPs).
❑
Domain Name: Allows you to create a domain name, required by some ISPs.
❑
Firmware Version: Shows the version of the firmware you are using.
❑
LAN IP Address and Subnet Mask: The IP address and subnet mask of the
Gateway as seen by internal LAN users in your home or office. The default IP
address is 192.168.1.1 and the default subnet mask is 255.255.255.0. It is
recommended that you keep the defaults.
❑
Wireless: Select Enable to use Gateway’s wireless functions. Select Disable
if no wireless functions are used.
❑
ESSID: The unique name shared among all points in a wireless network. It must
be identical for all points in the network, is case sensitive, and must not exceed
32 characters.
❑
Channel: Select the appropriate channel (1 to 11) from the list that corresponds
to your network settings. All points in your wireless network must use the same
channel in order to function correctly.
❑
Wired Equivalent Privacy (WEP): Select Mandatory to utilize WEP
encryption. Select Disable if no WEP functions are used. When WEP
encryption is enabled, click WEP Key Setting and follow instructions for
“setting WEP encryption” on page 56.
❑
WAN IP Address: Displays the Media Access Control (MAC) address of the
Gateway and controls the IP address and subnet mask of the Gateway as seen
by external users on the Internet.
❑
If your ISP is running a Dynamic Host Configuration Protocol (DHCP) server,
select
Obtain an IP Address Automatically . Your ISP will allocate an
IP address.
❑
If you have a static (fixed) IP address, subnet mask, and gateway setting
select
Specify an IP address . Enter the IP address, subnet mask, default
gateway address, and Domain Name Server (DNS) IP address provided by
your ISP.
Note: If you have used the Installation Wizard to install your Gateway, you
have already properly configured all of this screen’s initial settings.
Note: You can verify that your various settings are correct by attempting to connect
to the Internet as follows: type
www.hp.com into the address window of
your Web browser and press Enter .