HP GX008AA страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 67

background image

Maintenance Guidelines

To enhance the performance and extend the life of the monitor:

●

Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those
controls that are covered in the operating instructions. If the monitor is not operating properly or
has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.

●

Use only a power source and connection appropriate for this monitor, as indicated on the label/
back plate of the monitor.

●

Be sure the total ampere rating of the products connected to the outlet does not exceed the current
rating of the electrical outlet, and the total ampere rating of the products connected to the cord does
not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS
or A) for each device.

●

Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the
plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

●

Turn the monitor off when not in use. You can substantially increase the life expectancy of the
monitor by using a screen saver program and turning off the monitor when not in use.

●

Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked
or covered. Never push objects of any kind into cabinet slots or other openings.

●

Do not drop the monitor or place it on an unstable surface.

●

Do not allow anything to rest on the power cord. Do not walk on the cord.

●

Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.

●

When removing the monitor base, you must lay the monitor face down on a soft area to prevent it
from getting scratched, defaced, or broken.

Cleaning the Monitor

1.

Turn off the monitor and the computer.

2.

Unplug the monitor from the wall outlet.

3.

Clean the monitor plastics with a clean cloth dampened with water.

4.

Clean the monitor screen with an antistatic screen cleaner.

CAUTION:

Do not use benzene, thinner, ammonia, or any other volatile substances to clean the

monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.

Shipping the Monitor

Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.

4

Chapter 2 Safety and Maintenance Guidelines

«
...
10
11
12
13
14
...
»

Содержание GX008AA




































































Отзывы:

Нет отзывов

Похожие инструкции для GX008AA

Бренд: Baby Control Digital Страницы: 16

Бренд: Vaisala Страницы: 78

Бренд: Acer Страницы: 3

Бренд: Acer Страницы: 5

Бренд: Acer Страницы: 3

Бренд: Acer Страницы: 22

Бренд: Acer Страницы: 28

Бренд: Acer Страницы: 35

Бренд: Acer Страницы: 21

SyncMaster TC190

Бренд: Samsung Страницы: 19

Бренд: ON-LAP Страницы: 36

Intelli sense 7300REL

Бренд: ReliOn Страницы: 88

Бренд: Daewoo Страницы: 75

Бренд: AG Neovo Страницы: 53

LCD1770NX-BK(A)

Бренд: NEC Страницы: 28

Бренд: NEC Страницы: 8

Бренд: Mimo Monitors Страницы: 6

Бренд: Westinghouse Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды