HP FlexNetwork NJ5000, Руководство пользователя

Страница: 68 / 475

56
Configuring port mirroring
Port mirroring refers to the process of copying the packets passing through a port/VLAN/CPU to the
monitor port connecting to a monitoring device for packet analysis.
Terminology
Mirroring source
The mirroring source can be one or more monitored ports, called source ports. The device where the
ports reside is called a "source device." Packets (called "mirrored packets") passing through them
are copied to a port connecting to a monitoring device for packet analysis.
Mirroring destination
The mirroring destination is the destination port (also known as the monitor port) of mirrored packets
and connects to the data monitoring device. The device where the monitor port resides is called the
"destination device." The monitor port forwards the mirrored packets to its connecting monitoring
device.
A monitor port might receive multiple duplicates of a packet in some cases because it can monitor
multiple mirroring sources. For example, assume that Port 1 is monitoring bidirectional traffic on Port
2 and Port 3 on the same device. If a packet travels from Port 2 to Port 3, two duplicates of the packet
will be received on Port 1.
Mirroring direction
The mirroring direction indicates that the inbound, outbound, or bidirectional traffic can be copied on
a mirroring source:
•
Inbound
—Copies packets received on a mirroring source.
•
Outbound
—Copies packets sent out of a mirroring source.
•
Bidirectional
—Copies packets both received and sent on a mirroring source.
Mirroring group
Port mirroring is implemented through mirroring groups, which include local and remote mirroring
groups. Only local mirroring groups are supported.
Local port mirroring
In local port mirroring, the mirroring source and the mirroring destination are on the same device. A
mirroring group that contains the mirroring source and the mirroring destination on the device is
called a "local mirroring group."