HP FlexNetwork NJ5000, Руководство пользователя

Страница: 430 / 475

418
Configuring GTS on ports
1.
From the navigation tree, select
QoS
>
GTS
.
2.
Click the
Setup
tab, as shown in Figure 455 .
Figure 455 GTS
3.
Configure GTS parameters as described in Table 156 .
4.
Click
Apply
.
Table 156 Configuration items
Item Description
GTS Enable or disable GTS.
Match Type Select the GTS type. Only queue-based GTS is supported.
Queue Select a queue by its number in the range of 0 to 7.
CIR Specify the CIR, which is the average traffic rate.
Please select port(s) Select one or more ports by clicking them on the chassis front panel.
Configuring rate limit on a port
1.
Select
QoS
>
Line rate
from the navigation tree.
2.
Click the
Setup
tab to enter the rate limit configuration page.