HP FlexNetwork NJ5000, Руководство пользователя

Страница: 358 / 475

346
3.
Configure MAC authentication global settings as described in Table 121 , and then click
Apply
.
Table 121 Configuration items
Item Description
Enable MAC Authentication Specify whether to enable MAC authentication globally.
Offline Detection Period
Set the period that the device waits for traffic from a user before it
regards the user idle.
Quiet Time
Set the interval that the device must wait before it can perform MAC
authentication for a user that has failed MAC authentication.
Server Timeout Time
Set the interval that the device waits for a response from a RADIUS
server before it regards the RADIUS server unavailable.
Authentication ISP Domain
Specify the ISP domain for MAC authentication users.
If no ISP domain is specified, the system default authentication
domain is used for MAC authentication users.
Authentication Information
Format
Configure the properties of MAC authentication user accounts.
•
MAC without hyphen
—Uses MAC-based accounts, and
excludes hyphens from the MAC address, for example,
xxxxxxxxxxxx.
•
MAC with hyphen
—Uses MAC-based accounts, and
hyphenates the MAC address, for example, xx-xx-xx-xx-xx-xx.
•
Fixed
—Uses a shared account. You must specify a username
and password for the account.
Configuring MAC authentication on a port
1.
From the navigation tree, select
Authentication
>
MAC Authentication
.
2.
In the
Ports With MAC Authentication Enabled
area, click
Add
.
Figure 372 Configuring MAC authentication on a port
3.
Configure MAC authentication for a port as described in Table 122 , and then click
Apply
.
Table 122 Configuration items
Item Description
Port Select a port on which you want to enable MAC authentication.
Enable MAC VLAN
Specify whether to enable MAC-based VLAN on the port.
IMPORTANT:
You can enable MAC authentication only on hybrid ports.
Auth-Fail VLAN
Specify an existing VLAN as the MAC authentication Auth-Fail VLAN.
IMPORTANT:
•
The MAC authentication Auth-Fail VLAN has a lower priority than