HP FlexNetwork NJ5000, Руководство пользователя

Страница: 209 / 475

197
Figure 196 Add a static ARP entry
3.
Configure the static ARP entry as described in Table 80 .
4.
Click
Apply
.
Table 80 Configuration items
Item Description
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
Advanced
Options
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
IMPORTANT:
The VLAN ID must be the ID of the VLAN that has already been created, and the
port must belong to the VLAN. The corresponding VLAN interface must have
been created.
Port
Removing ARP entries
1.
From the navigation tree, select
Network
>
ARP Management
.
The default
ARP Table
page appears, as shown in Figure 195 .
2.
Remove ARP entries:
{
To remove specific ARP entries, select the boxes of target ARP entries, and click
Del
Selected
.
{
To remove all static and dynamic ARP entries, click
Delete Static and Dynamic
.
{
To remove all static ARP entries, click
Delete Static
.
{
To remove all dynamic ARP entries, click
Delete Dynamic
.
Configuring gratuitous ARP
1.
From the navigation tree, select
Network
>
ARP Management
.
2.
Click the
Gratuitous ARP
tab.