HP FlexNetwork NJ5000, Руководство пользователя

Страница: 136 / 475

124
Figure 130 Modifying a VLAN interface
3.
Modify a VLAN interface as described in Table 50 .
4.
Click
Apply
.
Table 50 Configuration items
Item Description
Select VLAN Interface
Select the VLAN interface to be configured.
The VLAN interfaces available for selection in the list are those created on the page
for creating VLAN interfaces.
Modify
IPv4
Address
DHCP Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to get an IP address automatically by selecting the
DHCP
or
BOOTP
option, or manually assign the VLAN interface an IP address by
selecting the
Manual
option. In the latter case, you must set the mask length or
enter a mask in dotted decimal notation format.
BOOTP
Manual
Admin
Status
Select
Up
or
Down
from the
Admin Status
list to bring up or shut down the
selected VLAN interface.
When the VLAN interface fails, shut down and then bring up the VLAN interface,
which might restore the VLAN interface.
By default, a VLAN interface is down if all Ethernet ports in the VLAN are down.
Otherwise, the VLAN interface is up.
When you set the admin status, follow these guidelines:
•
The current VLAN interface state in the
Modify IPv4 Address
and
Modify
IPv6 Address
frames changes as the VLAN interface state is modified in the
Admin Status
list.
•
The state of each port in the VLAN is independent of the VLAN interface state.