HP FlexNetwork 7500 Series, Справочник по командам

Страница: 663 / 738

648
Default
No maximum or minimum hop limit match criterion exists.
Views
RA guard policy view
Predefined user roles
network-admin
mdc-admin
Parameters
maximum : Specifies the maximum advertised hop limit. An RA message passes the check if its
current hop limit is not higher than the maximum advertised hop limit.
minimum : Specifies the minimum advertised hop limit. An RA message passes the check if its
current hop limit is not less than the minimum advertised hop limit.
limit : Specifies the advertised hop limit in the range of 1 to 255.
Usage guidelines
If a hop limit match criterion is set, and the RA message's current hop limit is 0, the message will be
dropped.
Examples
# Set the maximum hop limit match criterion to 128 for the RA guard policy policy1 .
<Sysname> system-view
[Sysname] ipv6 nd raguard policy policy1
[Sysname-raguard-policy-policy1] if-match hop-limit maximum 128
if-match prefix
Use if-match prefix to specify a prefix match criterion.
Use undo if-match prefix to delete the prefix match criterion.
Syntax
if-match prefix acl { ipv6-acl-number | name ipv6-acl-name }
undo if-match prefix acl
Default
No prefix match criterion exists.
Views
RA guard policy view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-acl-number : Specifies an IPv6 basic ACL by its number in the range of 2000 to 2999.
name ipv6-acl-name : Specifies an IPv6 basic ACL by its name, a case-insensitive string of 1 to 63
characters. The name must start with an English letter. To avoid confusion, the name cannot be all .