HP FlexNetwork 7500 Series, Справочник по командам

Страница: 563 / 738

548
Usage guidelines
If you do not specify any parameters, this command displays information about all IPv4 scanning
attack victims.
Examples
# (In standalone mode.) Display information about all IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip
Slot 1:
IP address VPN instance Detected on Duration(min)
192.168.24.82 -- Local 782
Slot 2:
IP address VPN instance Detected on Duration(min)
# (In standalone mode.) Display the number of IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip count
Slot 1:
Totally 1 victim IP addresses.
Slot 2:
Totally 0 victim IP addresses.
Table 82 Command output
Field Description
Totally 1 victim IP addresses Total number of IPv4 scanning attack victims.
IP address IPv4 address of the victim.
VPN instance
MPLS L3VPN instance to which the victim IPv4 address belongs. If the
victim IPv4 address is on the public network, this field displays hyphens
(--).
Detected on
Where the attack is detected: the device ( Local ).
Duration(min) The amount of time the attack lasts, in minutes.
Related commands
display attack-defense scan attacker ip
scan detect
display attack-defense scan victim ipv6
Use display attack-defense scan victim ipv6 to display information about IPv6 scanning attack
victims.
Syntax
In standalone mode:
display attack-defense scan victim ipv6 [ [ local ] [ slot slot-number ] ] [ count ]
In IRF mode:
display attack-defense scan victim ipv6 [ [ local ] [ chassis chassis-number slot slot-number ] ]
[ count ]
Views
Any view