HP FlexFabric 7900 Series, Руководство по установке

Страница: 13 / 58

Figure 7 Attaching the mounting brackets, and chassis rails to the chassis (network port side mounting
position)
Rack-mounting the switch
Attaching the slide rails to the rack
1. Determine the rack attachment position for the slide rails.
2. Install cage nuts (user-supplied) in the mounting holes in the rack posts.
3. Align the screw holes in one slide rail with the cage nuts in the rack post on one side, and use
screws (user supplied) to attach the slide rail to the rack, as shown in
Figure 8 .
4. Repeat the preceding steps to attach the other slide rail to the rack post on the other side.
Keep the two slide rails at the same height so the slide rails can attach into the chassis rails.
Figure 8 Installing the slide rails
8