31
Step Command
Remarks
[
next-hop-address
] |
nexthop-address
[
public
]
|
vpn-instance
d-vpn-instance-name
nexthop-address
} [
permanent
] [
preference
preference
] [
tag
tag-value
] [
description
text
]
3.
(Optional.) Set the
default preference for
IPv6 static routes.
ipv6 route-static default-preference
default-preference
The default value is 60.
Configuring RIPng between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a RIPng process for
an IPv6 VPN instance and
enter RIPng view.
ripng
[
process-id
]
vpn-instance
vpn-instance-name
N/A
3.
Redistribute VPN routes.
import-route protocol
[
process-id
]
[
allow-ibgp
] [
allow-direct
|
cost
cost-value
|
route-policy
route-policy-name
] *
By default, no routes are
redistributed into RIPng.
4.
Return to system view.
quit
N/A
5.
Enter interface view.
interface interface-type
interface-number
N/A
6.
Enable the RIPng process on
the interface.
ripng
process-id enable
By default, RIPng is disabled
on an interface.
Configuring OSPFv3 between an MCE and a PE
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an OSPFv3 process
for an IPv6 VPN instance
and enter OSPFv3 view.
ospfv3
[
process-id
|
vpn-instance
vpn-instance-name
] *
N/A
3.
Set the router ID.
router-id
router-id
N/A
4.
Disable routing loop
detection.
vpn-instance-capability simple
By default, routing loop detection
is enabled.
On an MCE network, you must
disable routing loop detection for
a VPN OSPFv3 process.
Otherwise, the MCE does not
receive OSPFv3 routes from the
PE.
5.
Redistribute VPN routes.
import-route
protocol
[
process-id
|
all-processes
|
allow-ibgp
] [
allow-direct
|
cost
cost-value
|
nssa-only
|
route-policy
route-policy-name
|
tag
tag
|
type
type
] *
By default, no routes are
redistributed into OSPFv3.
6.
Return to system view.
quit
N/A
7.
Enter interface view.
interface interface-type
interface-number
N/A
8.
Enable the OSPFv3 process
ospfv3 process-id
area
area-id
By default, OSPFv3 is disabled on
