51
[Switch-luser-manage-hello] service-type ssh
# Set a password for the local user to
123456TESTplat&!
in plain text. In FIPS mode, you must set
the password in interactive mode.
[Switch-luser-manage-hello] password simple 123456TESTplat&!
[Switch-luser-manage-hello] quit
# Create ISP domain
bbb
and configure the login users to use local authentication, HWTACACS
authorization, and RADIUS accounting.
[Switch] domain bbb
[Switch-isp-bbb] authentication login local
[Switch-isp-bbb] authorization login hwtacacs-scheme hwtac
[Switch-isp-bbb] accounting login radius-scheme rd
[Switch-isp-bbb] quit
# Enable the default user role feature to assign authenticated SSH users the default user role
network-operator
.
[Switch] role default-role enable
Verifying the configuration
# Initiate an SSH connection to the switch, and enter the username
hello@bbb
and the correct password.
The user logs in to the switch. (Details not shown.)
# Verify that the user can use the commands permitted by the network-operator user role. (Details not
shown.)
Authentication and authorization for SSH users by a RADIUS
server
Network requirements
As shown in
, configure the switch to meet the following requirements:
•
Use the RADIUS server for SSH user authentication and authorization.
•
Include domain names in the usernames sent to the RADIUS server.
•
Assign the default user role
network-operator
to SSH users after they pass authentication.
The RADIUS server runs on IMC. Add an account with the username
hello@bbb
on the RADIUS server.
The RADIUS server and the switch use
expert
as the shared key for secure RADIUS communication. The
ports for authentication and accounting are
1812
and
1813
, respectively.
Figure 12
Network diagram
