164
f.
Select
Normal
from the
Action
list.
g.
Click
OK
.
Figure 58
Adding an IP address group
3.
Add a portal device:
a.
Select
Access Service
>
Portal Service Management
>
Device
from the navigation tree to enter
the portal device configuration page.
b.
Click
Add
c.
Enter the device name
NAS
.
d.
Enter the IP address of the switch's interface connected to the host.
e.
Enter the key, which must be the same as that configured on the switch.
f.
Set whether to enable IP address reallocation.
This example uses direct portal authentication, and therefore select
No
from the
Reallocate IP
list.
g.
Set whether to support the portal server heartbeat and user heartbeat functions.
In this example, select
Yes
for both
Support Server Heartbeat
and
Support User Heartbeat
.
h.
Click
OK
.
Figure 59
Adding a portal device
4.
Associate the portal device with the IP address group:
a.
As shown in
, click the icon in the
Port Group Information Management
column of
device
NAS
to enter the port group configuration page.
