HP FlexFabric 11908-V, Руководство по установке

Страница: 94 / 114

88
Figure 55 Binding cables where they must be bent
• Route, bind, and attach excess cables for easy and safe maintenance and correct operation.
•
Do not tie power cables to slide rails.
•
When you connect a cable to an articulated part, such as connecting a grounding cable to a
cabinet door, leave enough slack in cables and make sure they are not stressed from any movement
of the part.
•
Cables must be protected at points where they might rub or come in contact with sharp edges or
heated areas. Use high temperature cables near heat sources.
• Securely fasten cables and take adequate measures to prevent loose connections.
Figure 56 Securely fastening cables
(1) Flat washer (2) Spring washer (3) Nut
• Fasten heavy or rigid power cables at the connectors to relief stress.
•
Do not use tapping screws to fasten the connecting terminals.
•
Bind together cables that are the same type and routed in the same direction.
Table 51 lists the cable bundling specifications.
Table 51 Tie-binding parameters
Cable bundle diameter (mm) Space between bundles (mm)
10 80 to 150
10 to 30 150 to 200
(1) (1)(2)
(3)
(1) (1)(2)
(3)