HP F5000 Скачать руководство пользователя | Manualshive

Страница: 83 / 99

background image

77

Appendix C Cables

The HP F5000 firewall supports various types of interface modules. The port types vary by the interface

module. Use dedicated cables to connect the ports of different types.

Table 33

Cables

Cable

Applicable port type

Description

Ethernet twisted pair cable

RJ-45 Ethernet port

Connects the RJ-45 Ethernet port of
the firewall for data transmission.

SFP/XFP port

Connects the fiber port of the
firewall for data transmission.

Ethernet twisted pair cable

Introduction

An Ethernet twisted pair cable consists of four pairs of insulated copper wires twisted together. Every
wire uses a different color, and has a diameter of about 1 mm (0.04 in). A pair of twisted copper cables

can cancel the electromagnetic radiation of each other, and reduce interference of external sources. An

Ethernet twisted pair cable mainly transmits analog signals and is advantageous in transmitting data

over shorter distances. It is the commonly used transmission media of the Ethernet. The maximum
transmission distance of the Ethernet twisted pair cable is 100 m (328.08 ft). To extend the transmission

distance, you can connect two twisted pair cable segments with a repeater. At most four repeaters can

be added, which means five segments can be joined together to provide a transmission distance of 500

m (1640.42 ft).
Ethernet twisted pair cables can be classified into category 3, category 4, category 5, category 5e,
category 6, and category 7 cables based on performance. In LANs, category 5, category 5e, and

category 6 are commonly used.

Table 34

Description of commonly used Ethernet twisted pair cables

Type Description

Category 5

Suitable for data transmission at a maximum speed of 100 Mbps

Category 5e

Suitable for data transmission at a maximum speed of 1000 Mbps

Category 6

Suitable for data transmission at a speed higher than 1 Gbps

Based on whether a metal shielding is used, Ethernet twisted pair cables can be classified into shielded
twisted pair (STP) and unshielded twisted pair (UTP). An STP cable provides a metallic braid between the

twisted pairs and the outer jacket. This metallic braid helps reduce radiation, prevent information from

being listened, and eliminate external electromagnetic interference (EMI) of external sources. STPs have

strict application requirements and are expensive although they provide better EMI prevention

performance than UTPs, so in most LANs, UTPs are commonly used.

«
...
81
82
83
84
85
...
»

Содержание F5000




































































































Отзывы:

Нет отзывов

Похожие инструкции для F5000

DFL-300 - Security Appliance

Бренд: D-Link Страницы: 179

TECHDOCS ION 9000

Бренд: PaloAlto Networks Страницы: 32

Бренд: Watchguard Страницы: 17

Бренд: Lanner electronics Страницы: 48

Firebox SOHO 6 Wireless

Бренд: Watchguard Страницы: 2

Quantis Appliance

Бренд: IDQ Страницы: 47

Бренд: Meraki Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды