HP ENVY x360 Скачать руководство пользователя страница 65

Страница: 65 / 111

Remove the display cable and I/O board cable from the clips on the sides of the fan

(2).

Remove the two Phillips M2.0 × 2.5 screws (3) that secure the fan to the computer.

Disconnect the fan cable from the ZIF connector on the system board (4), and then

remove the fan (5). Note the tape under the fan (6) that also helps secure the fan to

the computer.

To install the fan, reverse this procedure.

NOTE:

When replacing the tape (1) during fan installation, be sure the cables and tape

are as flat as possible so they do not interfere with the bottom cover. Only place the

tape on the flat fan surface.

Heat sink assembly

To remove the heat sink assembly, use this procedure and illustration.

Table 5-10

Heat sink description and part number

Description

Spare part number

Heat sink assembly

NOTE:

Thermal material is available as spare part number N15688-001.

N15687-001

Heat sink assembly

Содержание ENVY x360
















































































































Результаты поиска

Содержание ENVY x360

Отзывы:

Похожие инструкции для ENVY x360

Бренды по названию

Популярные бренды

HP ENVY x360, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ENVY x360

Отзывы:

Похожие инструкции для ENVY x360

Бренды по названию

Популярные бренды