TouchPad module
Before removing the TouchPad button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
Service cover on page 30
).
5.
Remove the battery (see
Battery on page 32
),
6.
Remove the fan (see
Fan on page 45
).
7.
Remove the card reader board (see
Card reader board on page 44
).
8.
Remove the system board (see
System board on page 47
).
9.
Remove the keyboard (see
Keyboard on page 55
).
Remove the TouchPad board:
1.
Turn the top cover upside down, with the back edge toward you.
2.
Remove the 4 Phillips PM2.5×3.0 PM screws
(1)
that secure the TouchPad to the top cover, and
then remove the 2 mylar covers
(2)
.
3.
Rotate the TouchPad board.
(3)
upward.
4.
Remove the TouchPad board and cable
(4)
from the top cover.
Reverse this procedure to install the TouchPad board and cable.
Component replacement procedures
57
Содержание ENVY m6 Sleekbook
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 25: ...3 Illustrated parts catalog Computer major components Computer major components 17 ...
