manualshive.com logo in svg

HP Engage One Retail System 143, Руководство по техническому обслуживанию и ремонту

HP Engage One Retail System 143 - это мощная и надежная кассовая система для розничной торговли. Для поддержания и обслуживания этого устройства важно иметь Maintenance and Service Manual. Вы можете загрузить его бесплатно с нашего сайта manualshive.com. Не забудьте скачать его, чтобы продлить срок службы вашего устройства.

Поделиться
Скачать
background image

Using Windows tools

You can create recovery media, system restore points, and backups of personal information using Windows 
tools.

NOTE:

If storage is 32 GB or less, Microsoft System Restore is disabled by default.

For more information and steps, see Help and Support.

▲

Type 

help

 in the taskbar search box, and then select Help and Support.

Restore and recovery

There are several options for recovering your system. Choose the method that best matches your situation 
and level of expertise:

IMPORTANT:

Not all methods are available on all products.

●

Windows offers several options for restoring from backup, refreshing the computer, and resetting the 
computer to its original state. For more information see Help and Support.

▲

Type 

help

 in the taskbar search box, and then select Help and Support.

●

If you need to correct a problem with a preinstalled application or driver, use the Reinstall drivers and/ 
or applications option (select products only) of HP Recovery Manager to reinstall the individual 
application or driver.

▲

Type 

recovery

 in the taskbar search box, select HP Recovery Manager, select Reinstall drivers 

and/or applications, and then follow the on-screen instructions.

●

If you want to recover the Windows partition to original factory content, you can choose the System 
Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media. 
For more information, see 

Recovering using HP Recovery Manager on page 119

. If you have not already 

created recovery media, see 

Creating HP Recovery media (select products only) on page 117

.

●

On select products, if you want to recover the computer's original factory partition and content, or if you 
have replaced the hard drive, you can use the Factory Reset option of HP Recovery media. For more 
information, see 

Recovering using HP Recovery Manager on page 119

.

●

On select products, if you want to remove the recovery partition to reclaim hard drive space, HP 
Recovery Manager offers the Remove Recovery Partition option.

For more information, see 

Removing the HP Recovery partition (select products only) on page 121

.

Recovering using HP Recovery Manager

HP Recovery Manager software allows you to recover the computer to its original factory state by using the 
HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery 
partition (select products only). If you have not already created recovery media, see 

Creating HP Recovery 

media (select products only) on page 117

.

What you need to know before you get started

●

HP Recovery Manager recovers only software that was installed at the factory. For software not provided 
with this computer, you must either download the software from the manufacturer's website or reinstall 
the software from the media provided by the manufacturer.

Backing up, restoring, and recovering in Windows 10 119

Содержание Engage One Retail System 143














































































































































Отзывы:

Нет отзывов

Похожие инструкции для Engage One Retail System 143

Makita RF1101 Parts Breakdown preview
RF1101
Бренд: Makita Страницы: 2
H3C UniServer R6900 G5 Manual preview
UniServer R6900 G5
Бренд: H3C Страницы: 83
IBM eserver pSeries 690 Installation Manual preview
eserver pSeries 690
Бренд: IBM Страницы: 142
IBM eServer 370 xSeries User Reference Manual preview
eServer 370 xSeries
Бренд: IBM Страницы: 218
IBM BladeCenter PS703 Service Manual preview
BladeCenter PS703
Бренд: IBM Страницы: 298
IBM BladeCenter T Type 8720 Hardware Maintenance Manual preview
BladeCenter T Type 8720
Бренд: IBM Страницы: 180
IBM Storwize V7000 Introduction And Implementation Manual preview
Storwize V7000
Бренд: IBM Страницы: 670
360 Systems V2000 Series Operation Manual preview
V2000 Series
Бренд: 360 Systems Страницы: 117
Maxtor DiamondMax 17 160 ATA Installation And Use Manual preview
DiamondMax 17 160 ATA
Бренд: Maxtor Страницы: 64
IBM totalstorage 200 Hardware Installation Manual preview
totalstorage 200
Бренд: IBM Страницы: 152
Edgewater Networks 200EW/E Quick Start Manual preview
200EW/E
Бренд: Edgewater Networks Страницы: 7
Bang & Olufsen BeoMaster 5 Manual preview
BeoMaster 5
Бренд: Bang & Olufsen Страницы: 28
LaCie Biometric Hard Drive Quick Install Manual preview
Biometric Hard Drive
Бренд: LaCie Страницы: 44
Campbell SM192 Instruction Manual preview
SM192
Бренд: Campbell Страницы: 30
Yotta SolarLEAF SL-1000 User Manual preview
SolarLEAF SL-1000
Бренд: Yotta Страницы: 13
Hamlet HRDSL512P4 Quick Start Manual preview
HRDSL512P4
Бренд: Hamlet Страницы: 11
Deliberant APC Mach 5 V3 Quick Installation Manual preview
APC Mach 5 V3
Бренд: Deliberant Страницы: 16
Linksys WRK54G User Manual preview
WRK54G
Бренд: Linksys Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды