No.
System Board Connector
System Board Label
Color
Component
17
DIMM4 (Channel A)
DIMM4
white
Memory Module
18
DIMM3 (Channel A)
DIMM3
black
Memory Module
19
DIMM2 (Channel B)
DIMM2
white
Memory Module
20
DIMM1 (Channel B)
DIMM1
black
Memory Module
21
Power
SATA PWR0
black
SATA Drives
22
Power
PWR
white
System Board
23
USB 3.0
FRONT USB3.0
blue
Front USB 3.0 Ports
24
USB 3.0
MEDIA3.0
black
USB 3.0 Device, such as a USB 3.0
Media Card Reader
25
SATA 3.0
SATA3
light blue
Any SATA Device other than the
Primary Hard Drive
26
SATA 3.0
SATA5
light blue
Any SATA Device other than the
Primary Hard Drive
Installing additional memory
The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-
SDRAM) dual inline memory modules (DIMMs).
DIMMs
The memory sockets on the system board can be populated with up to four industry-standard DIMMs.
These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum
memory support, you can populate the system board with up to 32-GB of memory configured in a
high-performing dual channel mode.
DDR3-SDRAM DIMMs
For proper system operation, the DDR3-SDRAM DIMMs must be:
●
industry-standard 240-pin
●
unbuffered non-ECC PC3-12800 DDR3-1600 MHz-compliant
●
1.35 volt or 1.5 volt DDR3/DDR3L-SDRAM DIMMs
The DDR3-SDRAM DIMMs must also:
●
support CAS latency 11 DDR3 1600 MHz (11-11-11 timing)
●
contain the mandatory JEDEC SPD information
ENWW
Installing additional memory
21
