HP EliteDesk 705 G2 Desktop Mini Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 58

background image

Removing and replacing a primary 3.5-inch hard drive

NOTE:

Before you remove the old hard drive, be sure to back up the data from the old hard drive so that

you can transfer the data to the new hard drive.

1.

Remove/disengage any security devices that prohibit opening the computer.

2.

Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.

Turn off the computer properly through the operating system, then turn off any external devices.

4.

Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION:

Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5.

If the computer is on a stand, remove the computer from the stand.

6.

Remove the computer access panel.

7.

Disconnect the power cable (1) and data cable (2) from the back of the hard drive.

Installing and removing drives

25

«
...
29
30
31
32
33
...
»

Содержание EliteDesk 705 G2 Desktop Mini



























































Отзывы:

Нет отзывов

Похожие инструкции для EliteDesk 705 G2 Desktop Mini

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды