HP EliteDesk 705 G1 Скачать руководство пользователя страница 12

Страница: 12 / 59

Hardware upgrades

Serviceability features

The computer includes features that make it easy to upgrade and service. No tools are needed for

most of the installation procedures described in this chapter.

Warnings and cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and

warnings in this guide.

WARNING!

To reduce the risk of personal injury from electrical shock, hot surfaces, or fire:

Disconnect the power cord from the wall outlet and allow the internal system components to cool

before touching.
Do not plug telecommunications or telephone connectors into the network interface controller (NIC)

receptacles.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
To reduce the risk of serious injury, read the

Safety & Comfort Guide. It describes proper workstation,

setup, posture, and health and work habits for computer users, and provides important electrical and

mechanical safety information. This guide is located on the Web at

http://www.hp.com/ergo

WARNING!

Energized and moving parts inside.

Disconnect power to the equipment before removing the enclosure.
Replace and secure the enclosure before re-energizing the equipment.

CAUTION:

Static electricity can damage the electrical components of the computer or optional

equipment. Before beginning these procedures, ensure that you are discharged of static electricity by

briefly touching a grounded metal object. See

Electrostatic discharge on page 50

for more

information.
When the computer is plugged into an AC power source, voltage is always applied to the system

board. You must disconnect the power cord from the power source before opening the computer to

prevent damage to internal components.

Chapter 2 Hardware upgrades

Содержание EliteDesk 705 G1




























































Результаты поиска

Содержание EliteDesk 705 G1

Отзывы:

Похожие инструкции для EliteDesk 705 G1

Бренды по названию

Популярные бренды

HP EliteDesk 705 G1, Справочник по аппаратуре

Результаты поиска

Содержание EliteDesk 705 G1

Отзывы:

Похожие инструкции для EliteDesk 705 G1

Бренды по названию

Популярные бренды