background image

Updating the BIOS

Updated versions of the BIOS may be available on the HP Web site.

Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs.

Some download packages contain a file named Readme.txt, which contains information regarding

installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed

on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as 

ROM date

 and 

System BIOS

) can be displayed as follows:

1.

Start Computer Setup.

2.

Use a pointing device or the arrow keys to select 

File > System Information

.

3.

To exit Computer Setup without saving your changes, click the 

Exit

 icon in the lower-left corner of

the screen, and then follow the on-screen instructions.

– or –

Use the 

tab

 key and the arrow keys to select 

File > Ignore Changes and Exit

, and then

press 

enter

.

NOTE:

You can also determine the BIOS version by turning on or restarting the computer, pressing

the 

esc

 key while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the

screen, and then pressing the 

f1

 key. Follow the on-screen instructions to exit this screen.

Downloading a BIOS update

CAUTION:

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation,

download and install a BIOS update only when the computer is connected to reliable external power

using the AC adapter. Do not download or install a BIOS update while the computer is running on

battery power, docked in an optional docking device, or connected to an optional power source.

During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Suspend or Hibernation.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.

Open your Web browser. For U.S. support, go to 

http://www.hp.com/go/contactHP

.

For worldwide support, go to 

http://welcome.hp.com/country/us/en/wwcontact_us.html

.

2.

Follow the on-screen instructions to identify your computer and access the BIOS update you want

to download.

3.

Click the option for software and driver downloads, type your computer model number in the

product box, and then press 

enter

. Follow the on-screen instructions to identify your computer and

access the BIOS update you want to download.

146

Chapter 5   Computer Setup

Содержание EliteBook 8570w






















































































































































































Отзывы: